Dinamap Pro 1000 Monitor

Product Details:

Mechanical

Monitor 12 in (H) x 4 in (D) x 14.5 in (W) 30.5 cm (H) x 36.8 cm (D) x 10.2 cm (W) Weight 12 lb (5450 gm) Environmental Operating Temperature: +41º F to +104º F (+5° C to +40° C) Storage Temperature -40º F to +158º F (-20º C to +60º C) Operating Humidity 5% to 95% noncondensing Storage Humidity 5% to 95% noncondensing Operating Atmospheric Pressure 700 hPa to 1060 hPa Storage Atmospheric Pressure 500 hPa to 1060 hPa Electrical AC Input Voltage 120 - 240 V AC Input Frequency 50 - 60 Hz AC Input Power 60 - 120 VA DC Input Voltage 18 - 24 V (supplied from a source conforming to IEC 601-1) DC Input Power 60 VA (supplied from a source conforming to IEC 601-1) Internal Battery 12 V nickel-metal-hydride (NiMH) Fuse (Battery) 10 A, 250 V Power Supply The PRO 1000 Monitor can be powered from the internal battery, AC power, or an external DC power source. Battery An internal, rechargeable battery pack powers the Monitor for 120 minutes (+/- 10 minutes)at a specified load. The battery typically charges to 90% capacity within 3 hours. Power Cable The 16-gauge power cable is detachable and measures 10 ft (3 meters) in length.

NIBP

Method: Oscillometric step deflation, results equivalent to intraarterial BP measurement Modes: Manual, automatic, stat b>BP Measurement Ranges: Systolic 30 to 290 mmHg (adult) 30 to 140 mmHg (neonate) MAP 20 to 260 mmHg (adult) 20 to 125 mmHg (neonate) Diastolic 10 to 220 mmHg (adult) 10 to 110 mmHg (neonate Resolution 1 mmHg Accuracy Meets or exceeds AAMI/ANSI standard SP10 Initial Cuff Inflation Pressure 140 mmHg default; user selec table (adult) 110 mmHg default; user selectable (neo) Maximum Determination Time 120 s (adult) 85 s (neonate) Over Pressure Monitor 300 to 330 mmHg (adult) 150 to 165 mmHg (neonate) Hose/Cuff Interface Clippard screw connectors at cuff end Pulse Rate When NIBP is the source, HR values are derived from the pulse rate that is determined by the oscillo-metric technique of measuring blood pressure. The rate source field is labeled NIBP. Adult Range: 30 to 200 bpm (± 3.5%) Neonate Range: 30 to 220 bpm (± 3.5%)

ECG

Leads available 3-lead configuration: I, II, III, MCL1 QRS amplitude range 0.2 to 5.0 mV QRS duration range 15 to 200 ms (does not reject 10 ms, 1 mV QRS) Heart rate accuracy 10 to 300 (adult) / 10 to 350 (neonate) beats/min ± 3 beats/min or 3% of reading, whichever is greater Heart rate resolution 1 beat/min Bandwidth Display/Recorder 0.5 to 40 Hz 0.05 to 40 Hz 0.05 to 100 Hz Standardizing voltage 1 mV marker Common mode rejection 1 mV RTI or 10 mm p-p max displayed noise allowed with 20 Vrms, 50-60 Hz input Input Impedance: > 2.5 M½ at 10 Hz 60 Hz tolerance up to 10 mV (with artifact detector off) up to 300 mV (at 1 mV QRS and artifact detector on) Pacemaker detection/rejection Pacer amplitude ± 2 mV to ± 700 mV Pacer width 0.1 ms to 2 ms with under or overshoot of 2 mV, 70 ms duration Pacer amplitude ± 2 mV to ± 700 mV Pacer width 0.1 ms to 2 ms Tall T wave rejection: 100% Lead off sensing current: < 0.1 mA DC signal leads < 1 mA DC driven lead Time to alarm high heart rate < 10 s per AAMI EC13 - 1992 low heart rate < 10 s per AAMI EC13 - 1992 cardiac standstill < 10 s per AAMI EC13 - 1992 tachy-cardia waveforms < 10 s per AAMI EC13 - 1992

Sp02

Functional Oxygen Saturation: Range 0% - 100% Accuracy 0% - 69% - unspecified Adult Accuracy (70 - 100%) NELLCOR* Sensor Accuracy Neonatal Accuracy (70% - 100%) Pulse Rate Range 20 to 250 beats/min Accuracy ±3 beats/min Audible Indicator Pitch changes with saturation; volume selectable from 0 (off) to 9 Waveforms Pulse plethysmograph waveform on LCD Sensor Connect/ Monitor will detect attachment or disconnection from patient within 15 s Pulse Detection Monitor will detect pulse or enter no signal state within 15 s of being attached to patient Loss of Pulse If the Monitor is unable to detect a pulse for 10 sec during normal SpO2 monitoring, the values flash, alternating patient values with dashes; and SEARCH appears in place of the pulse amplitude bar.

Temp

Scale ° Fahrenheit (F) ° Celsius (C) Predictive Mode Range 88.9° F (31.6° C) to 108.0° F (42.2° C) Accuracy ± 1.0° F (± 0.6° C) Resolution 0.1° F (0.1° C) Monitor Mode Range 80.0° F (26.7° C) to 108.0° F (42.2° C) Accuracy F (± 0.1° C) (when tested in a calibrated liquid bath; meets ASTM E1112, Table 1, in range specified) Resolution 0.1° F (0.1° C) Probes Use only IVAC** probes and probe covers. The size, shape, and thermal characteristics of the probe covers can affect the performance of the instrument. Inaccurate readings or retention problems may occur unless IVAC probes and probe covers are used.

HR/Pulse

ECG Heart rate accuracy 10 to 300 (adult) / 10 to 350 (neonate) beats/min ± 3 beats/min or 3% of reading, whichever is greater Time to alarm high heart rate < 10 s per AAMI EC13 - 1992; low heart rate < 10 s per AAMI EC13 - 1992; cardiac standstill < 10 s per AAMI EC13 - 1992: tachycardia waveforms < 10 s per AAMI EC13 - 1992 Range 20 - 250 beats/min Accuracy ± 3 beats/min Noninvasive Blood Pressure Range Adult 30 - 200 beats/min Neonate 30 - 220 beats/min Accuracy ± 3.5% Alarm Limits 10 - 250 beats/min

Resp

ECG-Derived Respiration Rate Leads available I or II Range 6 to 120 breaths/min (adult/ped.) 6 to 180 breaths/min (neonate) Accuracy ± 2 breaths/min or ± 3% of reading; whichever is greater Resolution 1 breath/min Base Impedance 100 to 2000 ½ Detection Sensitivity 0.2 ½ Bandwidth 0.1 to 5.0 Hz Excitation Frequency 61.5 kHz Amplitude < 300 µA rms

Battery

Capacity 7.0 amp-hr (manufacturer's rating) Battery Life 120 minutes (+/- 10 min) using fully charged internal battery (NIBP: 5-min auto cycle with adult cuff. ECG, RESP, SpO2: Active. TEMP: predictive mode. Printer: printing 2 waveforms for 1 min every 20 min at 25 mm/sec.) Charge time - 3 hours maximum with the Monitor switched off 4 hours maximum with the Monitor switched on.

To receive a price quote by email, please contact us.
[Click Here]

SKU: DM-DP1000-CTKN