Model 600 Strobe Lighthead, Green

Product Details:

REMOTE LIGHTHEADS, STROBE, LED, HALOGEN & COMBINATION600 SERIES LINEAR STROBE, LIGHTHEADS - FEATURES

A mid-sized directional, linear strobe lighthead with new stepped internal optics for improved light output at wide angles.600 Series are easy to operate and easy to install, simply choose the light source then pick the mounting style. . High intensity warning. Soldered-in strobe tubes and improved gasket material assures greater vibration and moisture resistance.Strobe tubes are parabolically centered within a highly polished reflector for maximum light output..Linear strobe tubes carry a two year Gold Medallion warranty.Furnished with 15’ of 3-conductor shielded cable and Amp Mate-N-Lok® connectors (requires a strobe power supply, purchased separately).Optional mounting configurations meet all your specific needs: chrome-plated or black polycarbonate trim ring; rubber grommet; pedestal/swivel mount; or round bar mounts in 1” and 1-1/4” versions..Available in all 5 safety colors. Mounting options are purchased separatelyCertifications:.KKK 1822-E - Federal Ambulance Specification.CAC, Title 13, Article 22 (red, blue and amber lightheads).SAE J1318 - Gaseous Discharge Warning Lamp for Authorized Emergency, Maintenance, and Service Vehicles (May 98) Class 1, Class 2, Class 3.NFPA 1901 - (1999 Edition) For NFPA application consult current NFPA Specification Lighting Packages Catalog

Installation

.WARNING!:All customers wires that connect to the possitive terminal of the batttery, must be sized to supply at least 125% of the maximum operating current and fused at the battery to carry the load..WARNING!:The strobe light power is a high voltage device. Do not touch or remove the strobe tube assesmbly while in opperation. Wait 10 minutes after dsconnecting the unit from its power source before starting any work or trouble shooting.

.Check behind the mounting area. You must have at least 2 inches clearance behind the lighthead, and the mounting surface must be flat..Using the measurements supplied, mark off the mounting holes and lighthead cut-out hole onto the mounting surface.After making off the mounting holes always double check all measurements before cutting or drilling..Drill the .250 screw holes for the fastex grommets then cut the lighthead cut-out hole as indicated..Connect the wires to the power source. Be sure to test for proper operation of your lighthead prior to use.

SKU: WH-602000G
$125.40

[Add to Cart] [View Cart]