Medical Oxygen Aluminum Cylinders ( E )

Medical Oxygen Aluminum Cylinders   ( E )
SKU: CC-9022E

FREE GROUND SHIPPING applies on orders of $500.00 or more and if the total order does not exceed 20.00 lbs.

$83.00
Product Description

Aluminum cylinders are seamless and about 40% lighter than steel. All cylinders are fully DOT approved and fully labeled. “On-Off” toggle handle for opening convenience. Tanks may be ordered with or without toggles. ALL TANKS SHIPPED EMPTY.

 Capacity: 24.08 cu ft / 679 liters, W/Std Valve Cap: 24.0 Cu Ft / 679 Liters...Pic 8

Part

No.

Service

Pressure

Diameter

Length

Empty

Weight

Oxygen

Water

Standard

Thread Size* 

 

(psi / bar)

(in / mm)

(in / mm)

(lbs / kgs)

(cu ft / liters)

(lbs / liters)

 

M150 2015 / 139 8.00 / 203.2 47.0 / 1194 48.8 / 22.1 150.0 / 4248 63.7 / 28.9 1.125-12UNF-2B
MM90 2216 / 153 8.00 / 203.2 36.2 / 919 39.5 / 17.9 122.0 / 3455 47.1 / 21.4 1.125-12UNF-2B
M90 2216 / 153 7.25 / 184.2 32.6 / 828 30.3 / 13.7 90.0 / 2549 34.7 / 15.7 1.125-12UNF-2B
M60 2216 / 153 7.25 / 184.2 22.9 / 582 22.3 / 10.1 60.0 / 1699 23.2 / 10.5 1.125-12UNF-2B
E 2015 / 139 4.38 / 111.3 25.4 / 645 7.8 / 3.6 24.0 / 679 10.2 / 4.6 .750-16UNF-2B
M22 2216 / 153 5.25 / 133.4 16.3 / 414 8.0 / 3.7 22.0 / 623 8.5 / 3.9 .750-16UNF-2B
D 2015 / 139 4.38 / 111.3 16.7 / 424 5.4 / 2.4 15.0 / 425 6.4 / 2.9 .750-16UNF-2B
C 2015 / 139 4.38 / 111.3 10.9 / 277 3.7 / 1.7 9.0 / 255 3.8 / 1.7 .750-16UNF-2B
ML7 2015 / 139 4.38 / 111.3 9.1 / 231 3.2 / 1.5 7.0 / 198 3.0 / 1.4 .750-16UNF-2B
ML6 2015 / 139 4.38 / 111.3 7.8 / 198 2.9 / 1.3 6.0 / 170 2.5 / 1.2 .750-16UNF-2B
M6 2216 / 153 3.21 / 81.5 11.8 / 300 2.3 / 1.0 6.0 / 170 2.3 / 1.0 .750-16UNF-2B
M4 2216 / 153 3.21 / 81.5 8.7 / 221 1.7 / .8 4.0 / 113 1.5 / .7 .750-16UNF-2B
M2 2216 / 153 2.50 / 63.5 5.7 / 145 .70 / .3 1.5 / 42 .6 / .3 .750-16UNF-2B

 

Ask for Catalina Cylinders medical products.

* Other thread sizes available upon request.

MATERIAL:  Every cylinder is produced from high strength aluminum alloy 6061-T6.

FINISH:  Standard oxygen cylinder finish is brushed body with green dome (white dome for Canada) and heat sensitive clear coat finish.

VALVES:  CGA designation valves installed upon request.

ACCESORIES:  The M150, M122, M90 and M60 are available with either a carrying handle or collar and valve protective cap.

REGULATION  &  INSPECTION:  All seamless aluminum alloy compressed gas cylinders are manufactured in accordance with U.S. Departmenet of Transportation (DOT) 3AL and Transport Canada (TC) 3ALM requirements. Every cylinder is inspected and tested by a DOT and TC authorized independent inspection agency.

rev. 01/08

Disclaimer: Prices subject to change without notice. Manufacturers occasionally make improvements to their product lines. Although we try to maintain our product information and photographs up-to-date, we cannot guarantee correctness.